These days…

cat on records

Our days are filled with comfort.

christmas couplesnowy brick buildingvintage christmaschristmas bikeI hope your days are filled with cheer and joy. Spend as much time as you can with family, and show your loved ones how much you care. This part of the year never neglects me – I always feel the urge to share little happinesses with those around me.

Happy Christmas,



DIY How To | Make your own coasters

I’ve been meaning to try this out for awhile now!

Ryan and I love to collect vintage and antique furniture, but part of the problem with that is it needs to be carefully cared for, ie. get coasters. Rather than buying some I wasn’t really all that in love with, though, I thought I might as well just put some fabric scraps to use and make my own. I’m always getting pretty fabric from Goodwill to use in my Etsy shop, and I hate to throw out the tiny pieces that are left after I’m done, so this was the perfect solution. Here’s how I made my coasters…

For supplies you’ll need: Cork board, Mod Podge, a paintbrush, a pencil, scissors, something circular to trace like a cup, fabric scraps, and about fifteen minutes!

First step | Make sure that the cup you chose is wide enough so it will cover the entire bottom of the cups, mugs, or steins that you will be setting on them. I turned this teacup over and used the mouth of it to trace since that’s bigger. Trace as many circles as you want coasters onto your fabric scraps with your marking tool.Second step | Carefully cut out the circles of fabric that you just traced.Third step | Trace and cut the same number of circles into your cork board.Fourth step | One at a time, cover one side of the coaster with a generous amount of Mod Podge. You’ll want it to seep up through the fabric a little, so don’t be shy about your application! Diluted Elmer’s glue might do the trick, too!Fifth step | Place the fabric circles one at a time over the Mod Podge and press firmly so the glue comes through. Make sure you press over every part of the coaster, including the edges so they don’t come up after the rest of it has dried.For some fabrics this may be all the Mod Podge you need (my stripes were fine with just this amount!), but with others you may need to apply another layer of glue on top of the fabric after this first application has dried – such was the case with my floral fabric. So, wait for it to dry just from pressing and test the fabric to see how well it is stuck to the cork board before assessing whether you’ll need to add more.
Sixth step | Let dry! My striped coasters were dry after only a few hours, but the floral ones needed a little longer to dry. Every type of fabric will absorb the glue and dry differently, so just pay attention to yours to see what it needs.

Pretty easy, right? You may also need to trim up the edges of the fabric with scissors if it hangs over the edge a bit. Make sure you wait until it’s completely dry and all of your layers of glue have been added before you do this! Have fun with it!Thanks for stopping by! I hope your scrap pile got a little smaller and I would love to hear your small project ideas for fabric pieces. Even after making these coasters I still have two clementine boxes full of them just waiting to be given life. Think you’ll give this project a try? I’d love to see how yours turn out!

Oh, yes, and these would make great housewarming gifts!


Update a thrifted lamp shade – DIY

Hey, thrifty ladies {and gents}!

Last night craft-fever hit me hard! While Ryan relaxed and settled down for the night I found myself getting all in a tizzy over recreating a thrifted lampshade. We bought this lamp and shade separately from Goodwill months ago, but it’s never looked exactly the way I wanted it to until now that I’ve added my own vintage fabric to it. Here’s how you can update an old lamp, too:

You’ll need a lamp {duh!}, scissors, fabric, hem tape or double sided tape, measuring tape, and a marking tool. You could also add some cute rick-rack or stitches to it depending on how much time you want to spend and how detailed you want the shade to be! I first thought I might do some stitching, but didn’t want to get holed up in my studio for too long on a night off, so I sprung for the tape.

First step: Strip the lampshade. When we bought ours it had ribbon hot glued to it from the previous owner. We took this off immediately, but the glue itself has been there ever since. Depending on your shade, you may choose also to take the fabric off entirely and have just the wire frame, but since our shade was white we knew it wouldn’t make a difference to the look at the end of the project, so we left it on.To make sure that you cut the right amount of fabric, measure the height of your lampshade as well as the diameter and write down both of your measurements. Then, add one inch to the height and one inch to the diameter so you’ll have space to fold over the edges.

Mark this new measurement on the wrong side {the side that won’t be showing when the project is finished} of your fabric, then snip, snip, snip!

Add the hem tape to the top and bottom edges of your fabric keeping in mind that you added an inch of fabric {a 1/2 inch for the top + a 1/2 inch for the bottom} for these adjustments. Folding the raw edge in will make the project look nice + neat.

Next you’ll fold both edges in a half inch and press down on the tape to stick them in place. Your fabric should now measure from top to bottom the same as the lampshade does. Almost there!

Add a strip of tape up the lampshade to hold on one of the sides of the fabric.

Add tape to the bottom and top edge of the shade, then, making sure your fabric is smooth, turn the lamp and attach as you go.

When you get to the end, remember that you added an inch in the measurement for overlap, so you can fold the fabric under as you stick it in place with the double-sided tape. Et voila!

I’d love to see how yours come out if you decide to give this project a try! It’s a simple way to spruce up your home and to dig into that gorgeous fabric stash I know you have hiding away.

Have a wonderful night!


The ultimate DIY thrift find!

Hello, my dears!

As you know, I was away last week for the Goodwill Summer Conference in Miami, Florida! It was hands down one of the best experiences of my life! I got to connect with so many amazing people who value thrift, creativity, and community as much as I do in a city vastly different from anything else I’ve ever seen. It was remarkable! My session was so. much. fun. Jenna Isaacson, Evette Rios, and I chatted about Goodwill, shared our favourite thrifting stories, and sipped sangria with our audience before I presented six easy DIY projects with one good ol’ fashioned thrift store staple: the mason jar. You can check out my post with the project ideas here! More on the trip later in the week…

So happy to be back in the Shire!


A peek into my shop…

This year Etsy opened up an About page for every shop!

It’s a space where each shop owner can go into greater detail about their process, inspiration, and work space, and I love that idea! So I’ve been very excited to update my own and this week I put the finishing touches on it! I’m so pleased with how the page turned out that I thought I’d share it with you. There’s only space for five photos on there, so the extras here are just for you. Enjoy!

First stop is the sewing station {above} where all of my products come to life. Bess is my trusty sewing machine, always ready for more work and easy to run. It’s smooth sailing when we’re working together…most of the time.

Also in my shop space is Ryan’s Grandmother’s old sewing machine / my packing station. I stitch all of my packages shut to avoid all of that obnoxious packing tape {photos of my packages here!} so having two machines is a real help.

With every order I tuck three snapshots inside. They’re all freshly printed from this station, but some of them are photos taken of my family throughout the years. The rest are little moments that I couldn’t stand to see disappear.

More photos of the room itself later! Thanks for visiting.


Vintage suits galore!

There’s one good thing about my family cleaning out our Camp…

I get to find new homes for {in other words; take home} some of the things deemed too obsolete. Of course, if I’d had my druthers, the whole place wouldn’t change a bit from the way my Grandparents intended it to be when they built it, but our family has grown remarkably since those days, and there’s concern that there isn’t enough space for everyone with all of the old artifacts in place. So, I give you, my family’s vintage bathing suit collection {part of it, anyway}:

I remember my Grandmother wearing the brown suit with the ric-rac well into the ’90s. But the one all the way to the right that I’ve been wearing occasionally {fits me like a glove!} was part of a matching set for her and my Grandfather much earlier than that.There was another that I loved so much. It was a high-waisted plaid bikini with big scalloped edges on the top and bottom, and heart appliques on the bum – so cute. A few summers ago for our lake’s 4th of July boat parade the theme was something like vintage-Americana, so my cousin Tracy wore that cute little two-piece, my sister wore the floral one, and I wore the suit on the right. My Mum said the bikini was too moth bitten and old from sitting in the closet all these years, so I’m pledging to take great care of these babies from here on out!

Happy early 4th of July!


P.s. I did a guest post for We Heart Vintage where I modeled two of these {and Ryan modeled one!}, take a peek!

New apartment inspiration!

Our move-in day is next Monday!

And with less than a week left, I’m finding myself super inspired to decorate our new space! I’ve been scouring Pinterest for some ideas on how to use what we have to create a new and different look for our home and here are some of the images that have really gotten my gears turning:

I can’t wait to get settled in and share a new home tour with you! Our new apartment doesn’t have as much built-in personality {fireplaces, moulding, etc.} as the one we live in now, so I’ll be doing a lot of creative styling to try to bring it to life. But, I suppose that just makes it more challenging and more exciting!

I’ve already got a list of must-do move-in DIYs going for things like the tub caddy above and a mug tree. It may take us awhile to get to the point where we’re ready to share our space, but I couldn’t be more excited about pulling everything together. Furniture arrangement ideas fill my head and my studio space will be the first thing I focus on since my shop’s reopening is scheduled for May 10th!

So much to do, so little time!

Image sources, top to bottom | one, two, three, four, five, six.